There are several devices, but the inhalation technique is common to all of them.

1. Before each inhalation, confirm the number of doses available.
2. Warm up the device to body temperature
3. Remove the cover from the device and shake it for 5 seconds.
4. Place the device in an upright position (L-shaped) to inhale.
5. Exhale until the lungs are empty.
6. Place the device between the teeth, closing the lips and putting the tongue down.
7. Inhale slowly and deeply and activate the device during inspiration.
8. Hold your breath for 5 to 10 seconds.
9. Exhale slow and gently.
10. Wait at least 30 seconds before repeating the activation of the device.
11. Clean the device with a dry cloth after each use.
12. Rinse your mouth with water after using the inhaler, do not swallow.

When using the Rapihaler for the first time, you will have to prepare it, you should also do so if you drop the device or if it has not been used for more than 7 days.

1. Warm up the device to body temperature.
2. Shake for 5 seconds.
3. Remove the cover.
4. Press the counter and waste 1 dose.
5. Wait 10 seconds and press again to waste a 2nd dose.
6. Your device is now ready for use.
7. Warm up the device to body temperature
8. Shake it for 5 seconds.
9. Open the cover.
10. Place the device in an upright position to inhale.
11. Exhale until the lungs are empty.
12. Place the device between the teeth, closing the lips and putting the tongue down.
13. Inhale slowly and deeply; and activate the device during inspiration.
14. Hold your breath for 5 to 10 seconds.
15. Exhale slowly and gently.
16. Clean the device with a dry cloth after each use.
17. Rinse your mouth with water after using the inhaler, do not swallow.