Breezhaler a dry powder inhaler

Should be used the inhaler provided with each box. Each inhaler must be disposed of after all capsules have been used.
Remove the cover.
Open the inhaler.
Separate one of the blisters from the strip. Remove the protective film from the blister and remove the capsule. Do not press the capsule through the aluminium foil. Do not swallow the capsule. and Never place it directly into the mouthpiece.
Insert the capsule into the device.
Close the inhaler.
Hold upright and Puncture the capsule by firmly pressing both side buttons at the same time.
You should hear a noise when the capsule is punctured.
Drill only once.
Release the side buttons.
Exhale until the lung is empty. Do not blow into the inhaler.
Place the applicator in your mouth and inhale quickly and deeply.
Hold your breath for at least 5 seconds.
During inhalation you will hear a buzzing sound.
Exhale slowly and gently.
Open the inhaler to check if there is still any powder in the capsule.
If there is still powder in the capsule: Close the inhaler and repeat the inhalation.
Remove the empty capsule and place it in your household waste.
Clean the device with a dry cloth after each use.
Close the inhaler by replacing the cap.
Rinse your mouth with water after using the inhaler and do not swallow.